If an erasure set had a drive replacement recently, we don't
need to attempt healing on another drive with in the same erasure
set - this would ensure we do not double heal the same content
and also prioritizes usage for such an erasure set to be calculated
sooner.
issue was introduced in #11106 the following
pattern
<-t.C // timer fired
if !t.Stop() {
<-t.C // timer hangs
}
Seems to hang at the last `t.C` line, this
issue happens because a fired timer cannot be
Stopped() anymore and t.Stop() returns `false`
leading to confusing state of usage.
Refactor the code such that use timers appropriately
with exact requirements in place.
crawler should only ListBuckets once not for each serverPool,
buckets are same across all pools, across sets and ListBuckets
always returns an unified view, once list buckets returns
sort it by create time to scan the latest buckets earlier
with the assumption that latest buckets would have lesser
content than older buckets allowing them to be scanned faster
and also to be able to provide more closer to latest view.
With new refactor of bucket healing, healing bucket happens
automatically including its metadata, there is no need to
redundant heal buckets also in ListBucketsHeal remove
it.
optimization mainly to avoid listing the entire
`.minio.sys/buckets/.minio.sys` directory, this
can get really huge and comes in the way of startup
routines, contents inside `.minio.sys/buckets/.minio.sys`
are rather transient and not necessary to be healed.
supports `mc admin config set <alias> heal sleep=100ms` to
enable more aggressive healing under certain times.
also optimize some areas that were doing extra checks than
necessary when bitrotscan was enabled, avoid double sleeps
make healing more predictable.
fixes#10497
this is needed such that we make sure to heal the
users, policies and bucket metadata right away as
we do listing based on list cache which only lists
'3' sufficiently good drives, to avoid possibly
losing access to these users upon upgrade make
sure to heal them.
Design: https://gist.github.com/klauspost/025c09b48ed4a1293c917cecfabdf21c
Gist of improvements:
* Cross-server caching and listing will use the same data across servers and requests.
* Lists can be arbitrarily resumed at a constant speed.
* Metadata for all files scanned is stored for streaming retrieval.
* The existing bloom filters controlled by the crawler is used for validating caches.
* Concurrent requests for the same data (or parts of it) will not spawn additional walkers.
* Listing a subdirectory of an existing recursive cache will use the cache.
* All listing operations are fully streamable so the number of objects in a bucket no
longer dictates the amount of memory.
* Listings can be handled by any server within the cluster.
* Caches are cleaned up when out of date or superseded by a more recent one.
only newly replaced drives get the new `format.json`,
this avoids disks reloading their in-memory reference
format, ensures that drives are online without
reloading the in-memory reference format.
keeping reference format in-tact means UUIDs
never change once they are formatted.
reference format should be source of truth
for inconsistent drives which reconnect,
add them back to their original position
remove automatic fix for existing offline
disk uuids
`mc admin info` on busy setups will not move HDD
heads unnecessarily for repeated calls, provides
a better responsiveness for the call overall.
Bonus change allow listTolerancePerSet be N-1
for good entries, to avoid skipping entries
for some reason one of the disk went offline.
add a hint on the disk to allow for tracking fresh disk
being healed, to allow for restartable heals, and also
use this as a way to track and remove disks.
There are more pending changes where we should move
all the disk formatting logic to backend drives, this
PR doesn't deal with this refactor instead makes it
easier to track healing in the future.
Also, revamp the way ListBuckets work make few portions
of the healing logic parallel
- walk objects for healing disks in parallel
- collect the list of buckets in parallel across drives
- provide consistent view for listBuckets()
It was observed in VMware vsphere environment during a
pod replacement, `mc admin info` might report incorrect
offline nodes for the replaced drive. This issue eventually
goes away but requires quite a lot of time for all servers
to be in sync.
This PR fixes this behavior properly.
inconsistent drive healing when one of the drive is offline
while a new drive was replaced, this change is to ensure
that we can add the offline drive back into the mix by
healing it again.
We can reduce this further in the future, but this is a good
value to keep around. With the advent of continuous healing,
we can be assured that namespace will eventually be
consistent so we are okay to avoid the necessity to
a list across all drives on all sets.
Bonus Pop()'s in parallel seem to have the potential to
wait too on large drive setups and cause more slowness
instead of gaining any performance remove it for now.
Also, implement load balanced reply for local disks,
ensuring that local disks have an affinity for
- cleanupStaleMultipartUploads()
fresh drive setups when one of the drive is
a root drive, we should ignore such a root
drive and not proceed to format.
This PR handles this properly by marking
the disks which are root disk and they are
taken offline.
healing was not working properly when drives were
replaced, due to the error check in root disk
calculation this PR fixes this behavior
This PR also adds additional fix for missing
metadata entries from .minio.sys as part of
disk healing as well.
Added code to ignore and print more context
sensitive errors for better debugging.
This PR is continuation of fix in 7b14e9b660
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
In large setups this avoids unnecessary data transfer
across nodes and potential locks.
This PR also optimizes heal result channel, which should
be avoided for each queueHealTask as its expensive
to create/close channels for large number of objects.
- acquire since leader lock for all background operations
- healing, crawling and applying lifecycle policies.
- simplify lifecyle to avoid network calls, which was a
bug in implementation - we should hold a leader and
do everything from there, we have access to entire
name space.
- make listing, walking not interfere by slowing itself
down like the crawler.
- effectively use global context everywhere to ensure
proper shutdown, in cache, lifecycle, healing
- don't read `format.json` for prometheus metrics in
StorageInfo() call.
Use reference format to initialize lockers
during startup, also handle `nil` for NetLocker
in dsync and remove *errorLocker* implementation
Add further tuning parameters such as
- DialTimeout is now 15 seconds from 30 seconds
- KeepAliveTimeout is not 20 seconds, 5 seconds
more than default 15 seconds
- ResponseHeaderTimeout to 10 seconds
- ExpectContinueTimeout is reduced to 3 seconds
- DualStack is enabled by default remove setting
it to `true`
- Reduce IdleConnTimeout to 30 seconds from
1 minute to avoid idleConn build up
Fixes#8773
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
The new auto healing model selects one node always responsible
for auto-healing the whole cluster, erasure set by erasure set.
If that node dies, another node will be elected as a leading
operator to perform healing.
This code also adds a goroutine which checks each 10 minutes
if there are any new unformatted disks and performs its healing
in that case, only the erasure set which has the new disk will
be healed.
Harshavardhana
Klaus Post
Bala FA
Anis Elleuch