- Go might reset the internal http.ResponseWriter() to `nil`
after Write() failure if the go-routine has returned, do not
flush() such scenarios and avoid spurious flushes() as
returning handlers always flush.
- fix some racy tests with the console
- avoid ticker leaks in certain situations
- The race happens with a goroutine that refreshes IAM cache data from storage.
- It could lead to deleted users re-appearing as valid live credentials.
- This change also causes CI to run tests without a race flag (in addition to
running it with).
- combine similar looking functionalities into single
handlers, and remove unnecessary proxying of the
requests at handler layer.
- remove bucket forwarding handler as part of default setup
add it only if bucket federation is enabled.
Improvements observed for 1kiB object reads.
```
-------------------
Operation: GET
Operations: 4538555 -> 4595804
* Average: +1.26% (+0.2 MiB/s) throughput, +1.26% (+190.2) obj/s
* Fastest: +4.67% (+0.7 MiB/s) throughput, +4.67% (+739.8) obj/s
* 50% Median: +1.15% (+0.2 MiB/s) throughput, +1.15% (+173.9) obj/s
```
As we use etcd's watch interface, we do not need the
network notifications as they are no-ops anyway.
Bonus: Remove globalEtcdClient global usage in IAM
additionally optimize for IP only setups, avoid doing
unnecessary lookups if the Dial addr is an IP.
allow support for multiple listeners on same socket,
this is mainly meant for future purposes.
console service should be shutdown last once all shutdown
sequences are complete, this is to ensure that we do not
prematurely kill the server before it cleans up the
`.minio.sys/tmp/uuid` folder.
NOTE: this only applies to NAS gateway setup.
when TLS is configured using IPs directly
might interfere and not work properly when
the server is configured with TLS certs but
the certs only have domain certs.
Also additionally allow users to specify
a public accessible URL for console to talk
to MinIO i.e `MINIO_SERVER_URL` this would
allow them to use an external ingress domain
to talk to MinIO. This internally fixes few
problems such as presigned URL generation on
the console UI etc.
This needs to be done additionally for any
MinIO deployments that might have a much more
stricter requirement when running in standalone
mode such as FS or standalone erasure code.
with console addition users cannot login with
root credentials without etcd persistent layer,
allow a dummy store such that such functionalities
can be supported when running as non-persistent
manner, this enables all calls and operations.
This feature also changes the default port where
the browser is running, now the port has moved
to 9001 and it can be configured with
```
--console-address ":9001"
```
Due to incorrect KMS context constructed, we need to add
additional fallbacks and also fix the original root cause
to fix already migrated deployments.
Bonus remove double migration is avoided in gateway mode
for etcd, instead do it once in iam.Init(), also simplify
the migration by not migrating STS users instead let the
clients regenerate them.
This is to ensure that there are no projects
that try to import `minio/minio/pkg` into
their own repo. Any such common packages should
go to `https://github.com/minio/pkg`
https://github.com/minio/console takes over the functionality for the
future object browser development
Signed-off-by: Harshavardhana <harsha@minio.io>
```
mc admin config set alias/ storage_class standard=EC:3
```
should only succeed if parity ratio is valid for all
server pools, if not we should fail proactively.
This PR also needs to bring other changes now that
we need to cater for variadic drive counts per pool.
Bonus fixes also various bugs reproduced with
- GetObjectWithPartNumber()
- CopyObjectPartWithOffsets()
- CopyObjectWithMetadata()
- PutObjectPart,PutObject with truncated streams
additionally also configure http2 healthcheck
values to quickly detect unstable connections
and let them timeout.
also use single transport for proxying requests
Allow requests to come in for users as soon as object
layer and config are initialized, this allows users
to be authenticated sooner and would succeed automatically
on servers which are yet to fully initialize.
Go stdlib resolver doesn't support caching DNS
resolutions, since we compile with CGO disabled
we are more probe to DNS flooding for all network
calls to resolve for DNS from the DNS server.
Under various containerized environments such as
VMWare this becomes a problem because there are
no DNS caches available and we may end up overloading
the kube-dns resolver under concurrent I/O.
To circumvent this issue implement a DNSCache resolver
which resolves DNS and caches them for around 10secs
with every 3sec invalidation attempted.
This PR fixes a hang which occurs quite commonly at higher concurrency
by allowing following changes
- allowing lower connections in time_wait allows faster socket open's
- lower idle connection timeout to ensure that we let kernel
reclaim the time_wait connections quickly
- increase somaxconn to 4096 instead of 2048 to allow larger tcp
syn backlogs.
fixes#10413
In almost all scenarios MinIO now is
mostly ready for all sub-systems
independently, safe-mode is not useful
anymore and do not serve its original
intended purpose.
allow server to be fully functional
even with config partially configured,
this is to cater for availability of actual
I/O v/s manually fixing the server.
In k8s like environments it will never make
sense to take pod into safe-mode state,
because there is no real access to perform
any remote operation on them.
The entire encryption layer is dependent on the fact that
KMS should be configured for S3 encryption to work properly
and we only support passing the headers as is to the backend
for encryption only if KMS is configured.
Make sure that this predictability is maintained, currently
the code was allowing encryption to go through and fail
at later to indicate that KMS was not configured. We should
simply reply "NotImplemented" if KMS is not configured, this
allows clients to simply proceed with their tests.
This commit refactors the certificate management implementation
in the `certs` package such that multiple certificates can be
specified at the same time. Therefore, the following layout of
the `certs/` directory is expected:
```
certs/
│
├─ public.crt
├─ private.key
├─ CAs/ // CAs directory is ignored
│ │
│ ...
│
├─ example.com/
│ │
│ ├─ public.crt
│ └─ private.key
└─ foobar.org/
│
├─ public.crt
└─ private.key
...
```
However, directory names like `example.com` are just for human
readability/organization and don't have any meaning w.r.t whether
a particular certificate is served or not. This decision is made based
on the SNI sent by the client and the SAN of the certificate.
***
The `Manager` will pick a certificate based on the client trying
to establish a TLS connection. In particular, it looks at the client
hello (i.e. SNI) to determine which host the client tries to access.
If the manager can find a certificate that matches the SNI it
returns this certificate to the client.
However, the client may choose to not send an SNI or tries to access
a server directly via IP (`https://<ip>:<port>`). In this case, we
cannot use the SNI to determine which certificate to serve. However,
we also should not pick "the first" certificate that would be accepted
by the client (based on crypto. parameters - like a signature algorithm)
because it may be an internal certificate that contains internal hostnames.
We would disclose internal infrastructure details doing so.
Therefore, the `Manager` returns the "default" certificate when the
client does not specify an SNI. The default certificate the top-level
`public.crt` - i.e. `certs/public.crt`.
This approach has some consequences:
- It's the operator's responsibility to ensure that the top-level
`public.crt` does not disclose any information (i.e. hostnames)
that are not publicly visible. However, this was the case in the
past already.
- Any other `public.crt` - except for the top-level one - must not
contain any IP SAN. The reason for this restriction is that the
Manager cannot match a SNI to an IP b/c the SNI is the server host
name. The entire purpose of SNI is to indicate which host the client
tries to connect to when multiple hosts run on the same IP. So, a
client will not set the SNI to an IP.
If we would allow IP SANs in a lower-level `public.crt` a user would
expect that it is possible to connect to MinIO directly via IP address
and that the MinIO server would pick "the right" certificate. However,
the MinIO server cannot determine which certificate to serve, and
therefore always picks the "default" one. This may lead to all sorts
of confusing errors like:
"It works if I use `https:instance.minio.local` but not when I use
`https://10.0.2.1`.
These consequences/limitations should be pointed out / explained in our
docs in an appropriate way. However, the support for multiple
certificates should not have any impact on how deployment with a single
certificate function today.
Co-authored-by: Harshavardhana <harsha@minio.io>
adds a feature where we can fetch the MinIO
command-line remotely, this
is primarily meant to add some stateless
nature to the MinIO deployment in k8s
environments, MinIO operator would run a
webhook service endpoint
which can be used to fetch any environment
value in a generalized approach.
It is possible in situations when server was deployed
in asymmetric configuration in the past such as
```
minio server ~/fs{1...4}/disk{1...5}
```
Results in setDriveCount of 10 in older releases
but with fairly recent releases we have moved to
having server affinity which means that a set drive
count ascertained from above config will be now '4'
While the object layer make sure that we honor
`format.json` the storageClass configuration however
was by mistake was using the global value obtained
by heuristics. Which leads to prematurely using
lower parity without being requested by the an
administrator.
This PR fixes this behavior.
CORS is notorious requires specific headers to be
handled appropriately in request and response,
using cors package as part of handlerFunc() for
options method lacks the necessary control this
package needs to add headers.
Walk() functionality was missing on gateway
implementations leading to missing functionality
for the browser UI such as remove multiple objects,
download as zip file etc.
This PR brings a generic implementation across
all gateway's, it is not required to repeat the
same code in all gateway's
Harshavardhana
Aditya Manthramurthy
Anis Elleuch
Klaus Post
Andreas Auernhammer
飞雪无情
Benjamin Sodenkamp