- copyObject in-place decryption failed
due to incorrect verification of headers
- do not decode ETag when object is encrypted
with SSE-C, so that pre-conditions don't fail
prematurely.
In federated NAS gateway setups, multiple hosts in srvRecords
was picked at random which could mean that if one of the
host was down the request can indeed fail and if client
retries it would succeed. Instead allow server to figure
out the current online host quickly such that we can
exclude the host which is down.
At the max the attempt to look for a downed node is to
300 millisecond, if the node is taking longer to respond
than this value we simply ignore and move to the node,
total attempts are equal to number of srvRecords if no
server is online we simply fallback to last dialed host.
Uploading files with names that could not be written to disk
would result in "reduce your request" errors returned.
Instead check explicitly for disallowed characters and reject
files with `Object name contains unsupported characters.`
size calculation in crawler was using the real size
of the object instead of its actual size i.e either
a decrypted or uncompressed size.
this is needed to make sure all other accounting
such as bucket quota and mcs UI to display the
correct values.
This commit fixes a performance issue caused
by too many calls to the external KMS - i.e.
for single-part PUT requests.
In general, the issue is caused by a sub-optimal
code structure. In particular, when the server
encrypts an object it requests a new data encryption
key from the KMS. With this key it does some key
derivation and encrypts the object content and
ETag.
However, to behave S3-compatible the MinIO server
has to return the plaintext ETag to the client
in case SSE-S3.
Therefore, the server code used to decrypt the
(previously encrypted) ETag again by requesting
the data encryption key (KMS decrypt API) from
the KMS.
This leads to 2 KMS API calls (1 generate key and
1 decrypt key) per PUT operation - while only
one KMS call is necessary.
This commit fixes this by fetching a data key only
once from the KMS and keeping the derived object
encryption key around (for the lifetime of the request).
This leads to a significant performance improvement
w.r.t. to PUT workloads:
```
Operation: PUT
Operations: 161 -> 239
Duration: 28s -> 29s
* Average: +47.56% (+25.8 MiB/s) throughput, +47.56% (+2.6) obj/s
* Fastest: +55.49% (+34.5 MiB/s) throughput, +55.49% (+3.5) obj/s
* 50% Median: +58.24% (+32.8 MiB/s) throughput, +58.24% (+3.3) obj/s
* Slowest: +1.83% (+0.6 MiB/s) throughput, +1.83% (+0.1) obj/s
```
Change distributed locking to allow taking bulk locks
across objects, reduces usually 1000 calls to 1.
Also allows for situations where multiple clients sends
delete requests to objects with following names
```
{1,2,3,4,5}
```
```
{5,4,3,2,1}
```
will block and ensure that we do not fail the request
on each other.
First step is to ensure that Path component is not decoded
by gorilla/mux to avoid routing issues while handling
certain characters while uploading through PutObject()
Delay the decoding and use PathUnescape() to escape
the `object` path component.
Thanks to @buengese and @ncw for neat test cases for us
to test with.
Fixes#8950Fixes#8647
This is to fix a situation where an object name incorrectly
is sent with '//' in its path heirarchy, we should reject
such object names because they may be hashed to a set where
the object might not originally belong because, this can
cause situations where once object is uploaded we cannot
delete it anymore.
Fixes#8873
Admin data usage info API returns the following
(Only FS & XL, for now)
- Number of buckets
- Number of objects
- The total size of objects
- Objects histogram
- Bucket sizes
This PR adds support below metrics
- Cache Hit Count
- Cache Miss Count
- Data served from Cache (in Bytes)
- Bytes received from AWS S3
- Bytes sent to AWS S3
- Number of requests sent to AWS S3
Fixes#8549
Currently, we use the top-level prefix "config/"
for all our IAM assets, instead of to provide
tenant-level separation bring 'path_prefix'
to namespace the access properly.
Fixes#8567
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
When checking if federation is necessary, the code compares
the SRV record stored in etcd against the list of endpoints
that the MinIO server is exposing. If there is an intersection
in this list the request is forwarded.
The SRV record includes both the host and the port, but the
intersection check previously only looked at the IP address. This
would prevent federation from working in situations where the endpoint
IP is the same for multiple MinIO servers. Some examples of where this
can occur are:
- running mulitiple copies of MinIO on the same host
- using multiple MinIO servers behind a NAT with port-forwarding
This allows for canonicalization of the strings
throughout our code and provides a common space
for all these constants to reside.
This list is rather non-exhaustive but captures
all the headers used in AWS S3 API operations
CopyObject precondition checks into GetObjectReader
in order to perform SSE-C pre-condition checks using the
last 32 bytes of encrypted ETag rather than the decrypted
ETag
This also necessitates moving precondition checks for
gateways to gateway layer rather than object handler check
if a bucket with `Captialized letters` is created, `InvalidBucketName` error
will be returned.
In the case of pre-existing buckets, it will be listed.
Fixes#6938
Prevents deferred close functions from being called while still
attempting to copy reader to snappyWriter.
Reduces code duplication when compressing objects.
This PR adds pass-through, single encryption at gateway and double
encryption support (gateway encryption with pass through of SSE
headers to backend).
If KMS is set up (either with Vault as KMS or using
MINIO_SSE_MASTER_KEY),gateway will automatically perform
single encryption. If MINIO_GATEWAY_SSE is set up in addition to
Vault KMS, double encryption is performed.When neither KMS nor
MINIO_GATEWAY_SSE is set, do a pass through to backend.
When double encryption is specified, MINIO_GATEWAY_SSE can be set to
"C" for SSE-C encryption at gateway and backend, "S3" for SSE-S3
encryption at gateway/backend or both to support more than one option.
Fixes#6323, #6696
minio-java tests were failing under multiple places when
auto encryption was turned on, handle all the cases properly
This PR fixes
- CopyObject should decrypt ETag before it does if-match
- CopyObject should not try to preserve metadata of source
when rotating keys, unless explicitly asked by the user.
- We should not try to decrypt Compressed object etag, the
potential case was if user sets encryption headers along
with compression enabled.
To conform with AWS S3 Spec on ETag for SSE-S3 encrypted objects,
encrypt client sent MD5Sum and store it on backend as ETag.Extend
this behavior to SSE-C encrypted objects.
The new call combines GetObjectInfo and GetObject, and returns an
object with a ReadCloser interface.
Also adds a number of end-to-end encryption tests at the handler
level.
* Revert "Encrypted reader wrapped in NewGetObjectReader should be closed (#6383)"
This reverts commit 53a0bbeb5b.
* Revert "Change SelectAPI to use new GetObjectNInfo API (#6373)"
This reverts commit 5b05df215a.
* Revert "Implement GetObjectNInfo object layer call (#6290)"
This reverts commit e6d740ce09.
This combines calling GetObjectInfo and GetObject while returning a
io.ReadCloser for the object's body. This allows the two operations to
be under a single lock, fixing a race between getting object info and
reading the object body.
This PR adds CopyObject support for objects residing in buckets
in different Minio instances (where Minio instances are part of
a federated setup).
Also, added support for multiple Minio domain IPs. This is required
for distributed deployments, where one deployment may have multiple
nodes, each with a different public IP.
This is an effort to remove panic from the source.
Add a new call called CriticialIf, that calls LogIf and exits.
Replace panics with one of CriticalIf, FatalIf and a return of error.
- Update startup banner to print storage class in capitals. This
makes it easier to identify different storage classes available.
- Update response metadata to not send STANDARD storage class.
This is in accordance with AWS S3 behaviour.
- Update minio-go library to bring in storage class related
changes. This is needed to make transparent translation of
storage class headers for Minio S3 Gateway.
This change brings public data-types such that
we can ask projects to implement gateway projects
externally than maintaining in our repo.
All publicly exported structs are maintained in object-api-datatypes.go
completePart --> CompletePart
uploadMetadata --> MultipartInfo
All other exported errors are at object-api-errors.go
This change refactor the ObjectLayer PutObject and PutObjectPart
functions. Instead of passing an io.Reader and a size to PUT operations
ObejectLayer expects an HashReader.
A HashReader verifies the MD5 sum (and SHA256 sum if required) of the object.
This change updates all all PutObject(Part) calls and removes unnecessary code
in all ObjectLayer implementations.
Fixes#4923
This PR also does backend format change to 1.0.1
from 1.0.0. Backward compatible changes are still
kept to read the 'md5Sum' key. But all new objects
will be stored with the same details under 'etag'.
Fixes#4312
Make sure to skip reserved bucket names in `ListBuckets()`
current code didn't skip this properly and also generalize
this behavior for both XL and FS.
Resource strings and paths are case insensitive on windows
deployments but if user happens to use upper case instead of
lower case for certain configuration params like bucket
policies and bucket notification config. We might not honor
them which leads to a wrong behavior on windows.
This is windows only behavior, for all other platforms case
is still kept sensitive.
* Filter lock info based on bucket, prefix and time since lock was held
* Implement list and clear locks REST API
* madmin: Add list and clear locks API
* locks: Clear locks matching bucket, prefix, relTime.
* Gather lock information across nodes for both list and clear locks admin REST API.
* docs: Add lock API to management APIs
