support proxying of tagging requests in active-active replication
Note: even if proxying is successful, PutObjectTagging/DeleteObjectTagging
will continue to report a 404 since the object is not present locally.
Add a hidden configuration under the scanner sub section to configure if
the scanner should sleep between two objects scan. The configuration has
only effect when there is no drive activity related to s3 requests or
healing.
By default, the code will keep the current behavior which is doing
sleep between objects.
To forcefully enable the full scan speed in idle mode, you can do this:
`mc admin config set myminio scanner idle_speed=full`
NOTE: This feature is not retro-active; it will not cater to previous transactions
on existing setups.
To enable this feature, please set ` _MINIO_DRIVE_QUORUM=on` environment
variable as part of systemd service or k8s configmap.
Once this has been enabled, you need to also set `list_quorum`.
```
~ mc admin config set alias/ api list_quorum=auto`
```
A new debugging tool is available to check for any missing counters.
Following policies if present
```
"Condition": {
"IpAddress": {
"aws:SourceIp": [
"54.240.143.0/24",
"2001:DB8:1234:5678::/64"
]
}
}
```
And client is making a request to MinIO via IPv6 can
potentially crash the server.
Workarounds are turn-off IPv6 and use only IPv4
This PR also increases per node bpool memory from 1024 entries
to 2048 entries; along with that, it also moves the byte pool
centrally instead of being per pool.
`(*xlStorageDiskIDCheck).CreateFile` wraps the incoming reader in `xioutil.NewDeadlineReader`.
The wrapped reader is handed to `(*xlStorage).CreateFile`. This performs a Read call via `writeAllDirect`,
which reads into an `ODirectPool` buffer.
`(*DeadlineReader).Read` spawns an async read into the buffer. If a timeout is hit while reading,
the read operation returns to `writeAllDirect`. The operation returns an error and the buffer is reused.
However, if the async `Read` call unblocks, it will write to the now recycled buffer.
Fix: Remove the `DeadlineReader` - it is inherently unsafe. Instead, rely on the network timeouts.
This is not a disk timeout, anyway.
Regression in https://github.com/minio/minio/pull/17745
This patch adds the targetID to the existing notification target metrics
and deprecates the current target metrics which points to the overall
event notification subsystem
use memory for async events when necessary and dequeue them as
needed, for all synchronous events customers must enable
```
MINIO_API_SYNC_EVENTS=on
```
Async events can be lost but is upto to the admin to
decide what they want, we will not create run-away number
of goroutines per event instead we will queue them properly.
Currently the max async workers is set to runtime.GOMAXPROCS(0)
which is more than sufficient in general, but it can be made
configurable in future but may not be needed.
`OpMuxConnectError` was not handled correctly.
Remove local checks for single request handlers so they can
run before being registered locally.
Bonus: Only log IAM bootstrap on startup.
When minio runs with MINIO_CI_CD=on, it is expected to communicate
with the locally running SUBNET. This is happening in the case of MinIO
via call home functionality. However, the subnet-related functionality inside the
console continues to talk to the SUBNET production URL. Because of this,
the console cannot be tested with a locally running SUBNET.
Set the env variable CONSOLE_SUBNET_URL correctly in such cases.
(The console already has code to use the value of this variable
as the subnet URL)
Optionally allows customers to enable
- Enable an external cache to catch GET/HEAD responses
- Enable skipping disks that are slow to respond in GET/HEAD
when we have already achieved a quorum
This PR adds a WebSocket grid feature that allows servers to communicate via
a single two-way connection.
There are two request types:
* Single requests, which are `[]byte => ([]byte, error)`. This is for efficient small
roundtrips with small payloads.
* Streaming requests which are `[]byte, chan []byte => chan []byte (and error)`,
which allows for different combinations of full two-way streams with an initial payload.
Only a single stream is created between two machines - and there is, as such, no
server/client relation since both sides can initiate and handle requests. Which server
initiates the request is decided deterministically on the server names.
Requests are made through a mux client and server, which handles message
passing, congestion, cancelation, timeouts, etc.
If a connection is lost, all requests are canceled, and the calling server will try
to reconnect. Registered handlers can operate directly on byte
slices or use a higher-level generics abstraction.
There is no versioning of handlers/clients, and incompatible changes should
be handled by adding new handlers.
The request path can be changed to a new one for any protocol changes.
First, all servers create a "Manager." The manager must know its address
as well as all remote addresses. This will manage all connections.
To get a connection to any remote, ask the manager to provide it given
the remote address using.
```
func (m *Manager) Connection(host string) *Connection
```
All serverside handlers must also be registered on the manager. This will
make sure that all incoming requests are served. The number of in-flight
requests and responses must also be given for streaming requests.
The "Connection" returned manages the mux-clients. Requests issued
to the connection will be sent to the remote.
* `func (c *Connection) Request(ctx context.Context, h HandlerID, req []byte) ([]byte, error)`
performs a single request and returns the result. Any deadline provided on the request is
forwarded to the server, and canceling the context will make the function return at once.
* `func (c *Connection) NewStream(ctx context.Context, h HandlerID, payload []byte) (st *Stream, err error)`
will initiate a remote call and send the initial payload.
```Go
// A Stream is a two-way stream.
// All responses *must* be read by the caller.
// If the call is canceled through the context,
//The appropriate error will be returned.
type Stream struct {
// Responses from the remote server.
// Channel will be closed after an error or when the remote closes.
// All responses *must* be read by the caller until either an error is returned or the channel is closed.
// Canceling the context will cause the context cancellation error to be returned.
Responses <-chan Response
// Requests sent to the server.
// If the handler is defined with 0 incoming capacity this will be nil.
// Channel *must* be closed to signal the end of the stream.
// If the request context is canceled, the stream will no longer process requests.
Requests chan<- []byte
}
type Response struct {
Msg []byte
Err error
}
```
There are generic versions of the server/client handlers that allow the use of type
safe implementations for data types that support msgpack marshal/unmarshal.
Currently, once the audit becomes offline, there is no code that tries
to reconnect to the audit, at the same time Send() quickly returns with
an error without really trying to send a message the audit endpoint; so
the audit endpoint will never be online again.
Fixing this behavior; the current downside is that we miss printing some
logs when the audit becomes offline; however this information is
available in prometheus
Later, we can refactor internal/logger so the http endpoint can send errors to
console target.
sendfile implementation to perform DMA on all platforms
Go stdlib already supports sendfile/splice implementations
for
- Linux
- Windows
- *BSD
- Solaris
Along with this change however O_DIRECT for reads() must be
removed as well since we need to use sendfile() implementation
The main reason to add O_DIRECT for reads was to reduce the
chances of page-cache causing OOMs for MinIO, however it would
seem that avoiding buffer copies from user-space to kernel space
this issue is not a problem anymore.
There is no Go based memory allocation required, and neither
the page-cache is referenced back to MinIO. This page-
cache reference is fully owned by kernel at this point, this
essentially should solve the problem of page-cache build up.
With this now we also support SG - when NIC supports Scatter/Gather
https://en.wikipedia.org/wiki/Gather/scatter_(vector_addressing)
replace io.Discard usage to fix NUMA copy() latencies
On NUMA systems copying from 8K buffer allocated via
io.Discard leads to large latency build-up for every
```
copy(new8kbuf, largebuf)
```
can in-cur upto 1ms worth of latencies on NUMA systems
due to memory sharding across NUMA nodes.
`GetParityForSC` has a value receiver, so Config is copied before the lock is obtained.
Make it pointer receiver.
Fixes:
```
WARNING: DATA RACE
Read at 0x0000079cdd10 by goroutine 190:
github.com/minio/minio/cmd.(*erasureServerPools).BackendInfo()
github.com/minio/minio/cmd/erasure-server-pool.go:579 +0x6f
github.com/minio/minio/cmd.(*erasureServerPools).LocalStorageInfo()
github.com/minio/minio/cmd/erasure-server-pool.go:614 +0x3c6
github.com/minio/minio/cmd.(*peerRESTServer).LocalStorageInfoHandler()
github.com/minio/minio/cmd/peer-rest-server.go:347 +0x4ea
github.com/minio/minio/cmd.(*peerRESTServer).LocalStorageInfoHandler-fm()
...
WARNING: DATA RACE
Read at 0x0000079cdd10 by goroutine 190:
github.com/minio/minio/cmd.(*erasureServerPools).BackendInfo()
github.com/minio/minio/cmd/erasure-server-pool.go:579 +0x6f
github.com/minio/minio/cmd.(*erasureServerPools).LocalStorageInfo()
github.com/minio/minio/cmd/erasure-server-pool.go:614 +0x3c6
github.com/minio/minio/cmd.(*peerRESTServer).LocalStorageInfoHandler()
github.com/minio/minio/cmd/peer-rest-server.go:347 +0x4ea
github.com/minio/minio/cmd.(*peerRESTServer).LocalStorageInfoHandler-fm()
```
Frank Wessels
Klaus Post
Poorna
jiuker
Sveinn
Anis Eleuch
Pedro Juarez
Harshavardhana
Aditya Manthramurthy
Praveen raj Mani
Krishnan Parthasarathi
Shireesh Anjal
Shubhendu
Adrian Najera